Inspection machines and gauge tooling is our specialty. Please see some of the many product we offer to inspect for
flaws or to tolerance parts. Your Quality is our success!
flaws or to tolerance parts. Your Quality is our success!
Inspection
&
Metrology
&
Metrology
 | |  | |  | |  | |  | |  | |  | |  | |  |
We manufacture machinery featuring
Automation Innovation Inc. Capacitive
ID/OD Non Contact inspection probes.
This includes but certainly is not
limited to the following types of
checks:
Automation Innovation Inc. Capacitive
ID/OD Non Contact inspection probes.
This includes but certainly is not
limited to the following types of
checks:
- Chamfers
- Bores
- Slots
- Grooves
- Splines
- Keyways
- Bore Depth
- Chip Contamination in machined features
- Threads
This inspection machine was built to inspect Air Bag detonation deploy devices for Bore
size and depth, retention groove position and size, and metal debris in the ID that would
cause field failures. The system utilizes an Automation Innovation Inc. Capacitive Probe
integrated into a CMM Rotary Dial chassis machine. The Dorner infeed conveyor
adjustable to several different part series feeds the IAI pick and Place to load the indexer
dial. In the precision indexer dial, the part is transferred throughout, where it is visually
inspected by a high resolution cognex camera for machined features, then bore
inspected by the capacitive probing station. Finally the part is ejected down different
chutes based on failure mode or passing part type into customer baskets. Exit chutes
include: Part type "A" Passing, Part type "B" Passing, Camera Rejection, Probe
Rejection.
Customer: Takata
PPH: 600
size and depth, retention groove position and size, and metal debris in the ID that would
cause field failures. The system utilizes an Automation Innovation Inc. Capacitive Probe
integrated into a CMM Rotary Dial chassis machine. The Dorner infeed conveyor
adjustable to several different part series feeds the IAI pick and Place to load the indexer
dial. In the precision indexer dial, the part is transferred throughout, where it is visually
inspected by a high resolution cognex camera for machined features, then bore
inspected by the capacitive probing station. Finally the part is ejected down different
chutes based on failure mode or passing part type into customer baskets. Exit chutes
include: Part type "A" Passing, Part type "B" Passing, Camera Rejection, Probe
Rejection.
Customer: Takata
PPH: 600