Assembly Machines
Oil pan baffle Assembly machine.
This machine torques 18 torx head screws to affix the baffle to the
oil pan assembly. The screws are self tapping, and the insertion is
verified for torque and that the fastener is fully seated when
driven. The feed bowl for fasteners is located under the machine
on a slide out mechanism for easy refilling. The driver motor is
atlas copco tensor S. The control system is Allen Bradley. The X and
Y axes are ball screw driven with our custom slides, and Allen
Bradley ultra 3000 drives with N series motors. Approx. 150 parts
per hour @ 100 percent efficiency.
This machine torques 18 torx head screws to affix the baffle to the
oil pan assembly. The screws are self tapping, and the insertion is
verified for torque and that the fastener is fully seated when
driven. The feed bowl for fasteners is located under the machine
on a slide out mechanism for easy refilling. The driver motor is
atlas copco tensor S. The control system is Allen Bradley. The X and
Y axes are ball screw driven with our custom slides, and Allen
Bradley ultra 3000 drives with N series motors. Approx. 150 parts
per hour @ 100 percent efficiency.
Installation of Baffle on Differenetial Cover on
automobile.
This machine used an orbital riveter to affix the baffle to the casting at
two points. The machine also inspected for thread presence in the oil
plug hole as well. Proper placement of the baffle and the part is
detected before the cycle could run. Machine ran 700 parts per hour @
100% efficiency.
automobile.
This machine used an orbital riveter to affix the baffle to the casting at
two points. The machine also inspected for thread presence in the oil
plug hole as well. Proper placement of the baffle and the part is
detected before the cycle could run. Machine ran 700 parts per hour @
100% efficiency.
 | |  | |  | |  | |  | |  | |  | |  | |  |